3900 Semi-Gloss


3900

 

AN EXTREMELY DURABLE, WATER BORNE MODIFIED ACRYLIC ENAMEL, WHICH PROVIDES SUPERIOR ADHESION AND ABRASION RESISTANCE. FOR USE ON MOST INTERIOR AND EXTERIOR SURFACES, WHERE MAXIMUM, DURABILITY IS DESIRED. EXCELLENT FOR USE OVER PRIMED OR PREVIOUSLY PAINTED METAL, INCLUDING GALVANIZED PRIMED OR PREVIOUSLY PAINTED CONCRETE, BRICK, CINDER, AND CONCRETE BLOCK. RECOMMENDED FOR WALLS, DOORS, WOOD TRIM, MACHINERY, TANKS, AND FACTORY EQUIPMENT. IDEAL FOR USE IN MODERATE TO HEAVY PEDESTRIAN TRAFFIC AREAS ON WOOD AND CONCRETE.

 

COLORS:
WHITE & TINTS

 

TYPICAL USES:
STEEL, CONCRETE, DRYWALL, GALVANIZED STEEL, WOOD, ALUMINUM, MASONRY, PLASTER, AND MACHINERY.

 

SURFACE PREPARATION:
SURFACE MUST BE CLEAN, DRY, AND FREE OF DIRT, OIL, GREASE, OLD LOOSE PAINT, AND OTHER FOREIGN MATTER. GLOSSY AREAS SHOULD BE DULLED BY SANDING. BARE WOOD AND OTHER ROUGH SURFACES SHOULD BE SANDED SMOOTH. PAINTED SURFACES: HAND OR POWER TOOL CLEAN AND SPOT PRIME. NEW CURED OR UNPAINTED CONCRETE-ACID ETCH, RINSE THROUGHLY WITH CLEAN WATER, AND ALLOW TO DRY BEFORE APPLYING COATING.

 

APPLICATION:
BRUSH, SPRAY, OR ROLL.

 

THINNING:
WATER

 

SPREAD RATE:
ONE MIL DRY 658 SQUARE FEET PER GALLON
TWO MIL DRY 329 SQUARE FEET PER GALLON

 

DRY TIME:
DRIES TO TOUCH IN 1 HOUR, CAN BE RE-COATED IN 4 HOURS

 

CLEAN UP:
WATER